製品情報
PRODUCTS
Chemicals for rubber
- Antiozonants
- Non-staining antiozonants
- Flex crack inhibitor
- Antioxidants
- Non-staining antioxidants
- Reactive antioxidants
- Surface crack protective agent
- Lubricant, Blooming regulator
- Co-crosslinking agent
- Anti-blocking agent for unvulcanized rubber_1
- Anti-blocking agent for unvulcanized rubber_2
- Anti-blocking agent for vulcanized rubber
- Mold release agent for hoses
- Processing aid
- Vulcanizing Agent
- Scorch retarder
- Vulcanization activator
- Appearance enhancer
製品名やキーワードで検索 Search
Flex crack inhibitor
NONFLEX H
Appearance and Characteristics
Appearance : Gray flakes
Melting point : 135℃ min.
Ash : 0.3% max.
Heating loss : 0.3% max.
Sieve residue (75 μm) : 0.5% max.
Performance/Purpose
NONFLEX H is an antioxidant that demonstrates effectiveness in preventing heat and oxidation degradation, flex-crack resistance, and ozone resistance. However, it exhibits high blooming, so the usage should be limited, typically around 0.3 parts per hundred rubber (PHR).
Packing : 20kg paper bag
CAS RN : 74-31-7
CAS RN : 74-31-7
NONFLEX F
Appearance and Characteristics
Appearance : Pale gray powder
Melting point : 215℃ min.
Ash : 0.3% max.
Heating loss : 0.3% max.
Performance/Purpose
NONFLEX F is an effective antioxidant that provides protection against heat and oxidation degradation. It also serves as a copper corrosion preventive agent. Despite being an amine-based compound, it exhibits low contamination.
Packing : 10kg paper bag
CAS RN : 93-46-9
CAS RN : 93-46-9
NONFLEX BA
Appearance and Characteristics
Appearance : Dark brown viscous liquid
Ash : 0.3% max.
Heating loss : 0.3% max.
Performance/Purpose
NONFLEX BA is particularly excellent in flex-crack resistance and provides preventive effects against heat and oxidation degradation. It has extremely low blooming, allowing for high dosage without concerns of excessive surface residue. While it may have some coloring properties, it exhibits minimal migration, making it suitable for products that require resistance to contact staining. It is effective for polar polymers such as CR (chloroprene rubber) and NBR (nitrile rubber).
Packing : 15kg can / 200kg drum
CAS RN : 68412-48-6
CAS RN : 68412-48-6
NONFLEX BA-P
Appearance and Characteristics
Appearance : Dark brown powder
Ash : 34.0% max.
Heating loss : 5.0% max.
Performance/Purpose
NONFLEX BA-P is a solidified form of the liquid NONFLEX BA, achieved by combining it with silica. It offers the same performance as NONFLEX BA.
Packing : 20kg paper bag
CAS RN : 68412-48-6, 112926-00-8
CAS RN : 68412-48-6, 112926-00-8
NONFLEX AW
Appearance and Characteristics
Appearance : Dark brown viscous liquid
Ash : 0.3% max.
Heating loss : 0.5% max.
Performance/Purpose
NONFLEX AW exhibits a wide range of performance capabilities, including ozone resistance, heat and oxidation degradation prevention, and excellent flex-crack resistance when used in combination with OZONONE 3C, 6C, and SUNTIGHT products. It is less prone to blooming, but it has strong coloring properties and migration. It is also effective as an antioxidant for feed, oil, and resin applications.
Packing : 15kg can / 200kg drum
CAS RN : 91-53-2
CAS RN : 91-53-2
NONFLEX AW-P
Appearance and Characteristics
Appearance : Dark reddish brown pellets
Ash : 33.5% max.
Heating loss : 4.0% max.
Performance/Purpose
NONFLEX AW-P is a solidified form of the liquid NONFLEX AW, achieved by combining it with silica. It offers the same performance as NONFLEX AW.
Packing : 20kg paper bag
CAS RN : 91-53-2, 112926-00-8
CAS RN : 91-53-2, 112926-00-8
